【Note】

[] Do not include Raspberry Pi

【Product Introduction】

[] Raspberry Pi 5 shell kit A includes a PCIe to Gigabit network port, and all interfaces are converted to the same side. The Raspberry Pi 5 all-in-one computer is tailored for Raspberry Pi 5. It has a modular design and can be quickly used with simple assembly. It has a large space, rich interfaces and strong expandability.

【Product Details】

[] Raspberry Pi 5 All-in-One Computer

[] Designed specifically for Raspberry Pi 5

[] Modular design, simple assembly and quick use, large space, rich interfaces and strong expandability

【Version Selection】

[Type A] PCIe expansion Gigabit Ethernet port

[Type B] PCIe expansion 4-way USB3.2 Gen1

[Type C] PCIe expansion M.2

[]All versions do not include the Raspberry Pi 5 motherboard . Please purchase it separately if you need it.

【Interface introduction of each version】

[Type A] PCIe extended Gigabit Ethernet port version

[Type B] PCIe expansion 4-way USB3.2 Gen1 version

[Type C]PCIe expansion M.2 version

【Large space and strong expandability】

[] There is enough space inside the chassis to connect various expansion modules, such as PoE modules, 

[] and there is still space for wiring, which is good news for people with obsessive-compulsive disorder.

【Lead out Pi5 peripheral interface to support front and rear power supply modes】

[] Each version comes with a Micro HDMI to HDMI adapter board, and supports the Type-C interface, HDMI and terminal blocks, so that the interface is not hidden deep in the chassis, making it convenient for other peripherals to access the HDMI interface, and supports two power supply methods: front and back.

【Dual 4K HD output】

[] Each version supports dual HDMI ports and dual 4K video output

【Three-dimensional air duct for efficient heat dissipation】

[] Reserve ventilation grid and install fans for better heat dissipation, This product does not contain a fan , if necessary, please purchase it separately

【Quick Installation Steps】

[] Prepare the screws shown above

[] Connect the Raspberry Pi and HDMI converter board and fix them with 7 No. 1 screws and install them on the white aluminum alloy base.

[] According to the version you purchased, install the remaining expansion board (here we take the Gigabit Ethernet port version as an example) on the white aluminum alloy base plate with two No. 1 screws, and connect the power cord and debug serial port cable as shown in the figure. Set aside for later use.

[] Fix the two brackets with all No. 2 screws and the rear panel with two No. 3 screws. Once the image is complete, place the silicone button in the designated position.

[] Push the board installed in step 2 horizontally into the bottom rail of the housing. Be careful not to let the silicone button fall off.

[] Align the front baffle with the connector and secure it with two No. 3 screws. 

[] Close the top cover and secure it with four No. 3 screws to complete the installation. 

【Product Size】